The Version 1L covers the turn signal portion of the LED tail lights on the 2021+ Ford Bronco, giving the tails a smoked, tinted, or patterned appearance with or without the lights on. This was a user-submitted design that quickly became one of our most popular Bronco overlays — we think it was done right the first time. Sold as a left/right pair, precision cut for the Bronco's LED tail light configuration.
Important: These overlays are designed for the LED taillights only. They are not compatible with the halogen tail light version. Check your Bronco's tail light type before ordering.
LX+ and air-egress channel materials have micro-channels cut into the adhesive side that allow air to escape during installation — significantly easier to apply without bubbles, especially on the first attempt.
Orientation tip: You can tell driver from passenger side by the angled design on the bottom of each overlay.
What you'll need:
Clean the tail light surface thoroughly — no wax-based products. Wet install is recommended: spray the adhesive side of the vinyl with application fluid or soapy water, position the overlay on the tail light, slide into alignment, then squeegee from center outward to push out the fluid. Allow to dry fully before driving.
Fits: 2021+ Ford Bronco — LED taillights only (all trims with factory LED tails). Does not fit halogen taillights.
How do I know if my Bronco has LED or halogen taillights?
LED taillights have a distinct segmented LED light bar design. Halogen tails have a conventional round/oval bulb visible through the lens. If you're unsure, check your Bronco's window sticker or compare to product photos.
Will the overlay affect brake light brightness?
Dark Smoke will reduce apparent brightness somewhat — this is expected and common with any smoked tail light treatment. Light Smoke has minimal impact. These overlays comply with general use; always ensure your lights remain visible to other drivers.
What's the difference between Dark Smoke and Dark Smoke Stealth?
Dark Smoke has a gloss finish; Dark Smoke Stealth has a matte finish. If you're running a flat or satin exterior, Stealth blends in better. Both are the same level of tint darkness.
Do the patterned options (Honeycomb, Carbon Fiber, Galaxy) look good when the lights are off?
When the lights are off, all three appear as a standard dark smoke tint — the pattern becomes visible when the LEDs illuminate from behind. Galaxy is the exception; it retains a subtle metallic sheen even when unlit.
Are these easy to remove?
Yes — apply mild heat and peel slowly. No adhesive residue remains on clean, properly prepared surfaces.
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
